Home
Smalley Crest to Crest Wave Spring Inch Stainless Steel

Smalley Crest to Crest Wave Spring Inch Stainless Steel

SKU: 2442

Details

Wave springs reduce spring height by 50%
Same force and deflection as ordinary coil / compression springs
Wave springs fit tight radial and axial spaces
Over 4,000 standard springs in carbon and stainless steel (¼" to 16", 6 mm to 400 mm)
No Tooling Charges™ on custom designs (.200" to 120" diameters)
Exotic alloys available

Smalley Wave Springs (Flat Wire Compression Springs) offer the unique advantage of space savings when used to replace coil springs. By reducing spring operating height, wave springs also produce a decrease in the spring cavity. With a smaller assembly size and less material used in the manufacturing process, a cost savings is realized.

Wave springs operate as load bearing devices. They take up play and compensate for dimensional variations within assemblies. A virtually unlimited range of forces can be produced whereby loads build either gradually or abruptly to reach a predetermined working height. This establishes a precise spring rate in which load is proportional to deflection.

Functional requirements are necessary for both dynamic and static spring applications. Special performance characteristics are individually built into each spring to satisfy a variety of precise operating conditions. Typically, a wave spring will occupy an extremely small area for the amount of work it performs. The use of this product is demanded, but not limited to tight axial and radial space constraints.

Part Number	Operates in a bore dia.	Clears Shaft dia.	Load (lb)	Work Height	Reference Free Height	No of Waves	No of Turns	Thickness	Radial Wall	Reference Spring Rate (lb/in)
YC025-L1* S17	0.250	0.150	2	0.033	0.075	2.5	3	0.006	0.024	48
YC025-L2* S17	0.250	0.150	2	0.050	0.100	2.5	4	0.006	0.024	40
YC025-L3* S17	0.250	0.150	2	0.060	0.125	2.5	5	0.006	0.024	31
YC025-L4* S17	0.250	0.150	2	0.075	0.150	2.5	6	0.006	0.024	27
YC025-L5* S17	0.250	0.150	2	0.085	0.175	2.5	7	0.006	0.024	22
YC025-L6* S17	0.250	0.150	2	0.095	0.200	2.5	8	0.006	0.024	19
YC025-L7* S17	0.250	0.150	2	0.120	0.225	2.5	9	0.006	0.024	19
YC025-L8* S17	0.250	0.150	2	0.140	0.275	2.5	11	0.006	0.024	15
YC025-L9* S17	0.250	0.150	2	0.170	0.325	2.5	13	0.006	0.024	13
YC025-M1* S17	0.250	0.150	5	0.037	0.075	2.5	3	0.008	0.024	132
YC025-M2* S17	0.250	0.150	5	0.048	0.100	2.5	4	0.008	0.024	96
YC025-M3* S17	0.250	0.150	5	0.065	0.125	2.5	5	0.008	0.024	83
YC025-M4* S17	0.250	0.150	5	0.075	0.150	2.5	6	0.008	0.024	67
YC025-M5* S17	0.250	0.150	5	0.090	0.175	2.5	7	0.008	0.024	59
YC025-M6* S17	0.250	0.150	5	0.100	0.200	2.5	8	0.008	0.024	50
YC025-M7* S17	0.250	0.150	5	0.120	0.225	2.5	9	0.008	0.024	48
YC025-M8* S17	0.250	0.150	5	0.148	0.275	2.5	11	0.008	0.024	39
YC025-M9* S17	0.250	0.150	5	0.175	0.325	2.5	13	0.008	0.024	33
YC031-L1 S17	0.312	0.200	3	0.070	0.114	2.5	3	0.008	0.032	68
YC031-L2 S17	0.312	0.200	3	0.096	0.152	2.5	4	0.008	0.032	54
YC031-L3 S17	0.312	0.200	3	0.118	0.190	2.5	5	0.008	0.032	42
YC031-L4 S17	0.312	0.200	3	0.145	0.228	2.5	6	0.008	0.032	36
YC031-L5 S17	0.312	0.200	3	0.165	0.266	2.5	7	0.008	0.032	30
YC031-L6 S17	0.312	0.200	3	0.195	0.304	2.5	8	0.008	0.032	28
YC031-L7 S17	0.312	0.200	3	0.215	0.342	2.5	9	0.008	0.032	24
YC031-L8 S17	0.312	0.200	3	0.262	0.418	2.5	11	0.008	0.032	19
YC031-L9 S17	0.312	0.200	3	0.309	0.494	2.5	13	0.008	0.032	16
YC031-M1 S17	0.312	0.200	6	0.072	0.114	2.5	3	0.010	0.032	143
YC031-M2 S17	0.312	0.200	6	0.096	0.152	2.5	4	0.010	0.032	107
YC031-M3 S17	0.312	0.200	6	0.123	0.190	2.5	5	0.010	0.032	90
YC031-M4 S17	0.312	0.200	6	0.144	0.228	2.5	6	0.010	0.032	71
YC031-M5 S17	0.312	0.200	6	0.176	0.266	2.5	7	0.010	0.032	67
YC031-M6 S17	0.312	0.200	6	0.197	0.304	2.5	8	0.010	0.032	56
YC031-M7 S17	0.312	0.200	6	0.227	0.342	2.5	9	0.010	0.032	52
YC031-M8 S17	0.312	0.200	6	0.278	0.418	2.5	11	0.010	0.032	43
YC031-M9 S17	0.312	0.200	6	0.336	0.494	2.5	13	0.010	0.032	38
YC037-L1 S17	0.375	0.250	4	0.062	0.150	2.5	3	0.008	0.032	45
YC037-L2 S17	0.375	0.250	4	0.098	0.200	2.5	4	0.008	0.032	39
YC037-L3 S17	0.375	0.250	4	0.108	0.250	2.5	5	0.008	0.032	28
YC037-L4 S17	0.375	0.250	4	0.135	0.300	2.5	6	0.008	0.032	24
YC037-L5 S17	0.375	0.250	4	0.150	0.350	2.5	7	0.008	0.032	20
YC037-L6 S17	0.375	0.250	4	0.184	0.400	2.5	8	0.008	0.032	19
YC037-L7 S17	0.375	0.250	4	0.195	0.450	2.5	9	0.008	0.032	16
YC037-L8 S17	0.375	0.250	4	0.228	0.500	2.5	10	0.008	0.032	15
YC037-L9 S17	0.375	0.250	4	0.240	0.550	2.5	11	0.008	0.032	13
YC037-M1 S17	0.375	0.250	7	0.081	0.150	2.5	3	0.011	0.032	101
YC037-M2 S17	0.375	0.250	7	0.119	0.200	2.5	4	0.011	0.032	86
YC037-M3 S17	0.375	0.250	7	0.145	0.250	2.5	5	0.011	0.032	67
YC037-M4 S17	0.375	0.250	7	0.180	0.300	2.5	6	0.011	0.032	58
YC037-M5 S17	0.375	0.250	7	0.202	0.350	2.5	7	0.011	0.032	47
YC037-M6 S17	0.375	0.250	7	0.240	0.400	2.5	8	0.011	0.032	44
YC037-M7 S17	0.375	0.250	7	0.262	0.450	2.5	9	0.011	0.032	37
YC037-M8 S17	0.375	0.250	7	0.298	0.500	2.5	10	0.011	0.032	35
YC037-M9 S17	0.375	0.250	7	0.327	0.550	2.5	11	0.011	0.032	31

Additional Info

Additional Info

Weight	0.0100
Material	0
Standard Number	No
Second Standard	No
Drive	0
Head	-
American Generic Brand Term	No
Diameter	0
Length	No

Reviews

Information

About us Contact us Sign Up Home Page Advertise Promote Brochure Advanced Search Site Issues Privacy Policy Site Map

Coatings

Kitting

Disclaimer

dimensional data and technical information shown on the fastenerdata website is in the public domain and has not been acquired through the standards agencies, it has been completed and compiled by fastenerdata and is for guidance only; where discrepancies are found they are subject to change without notice. fastenerdata makes no warranties or representations regarding the accuracy and validity of such information and data, and in order to ensure your interest we suggest you contact the relevant standards authority for total accuracy, fine detail and supporting information. fastenerdata is supported by paid advertisers and all pages may contain paid or sponsored content